about shop patterns projects printables extras sponsorship wild olive twitter flickr pinterest subscribe

project // millenium falcon felt plush

Millennium Falcon Felt Plush


Happy Star Wars Day! This May the Fourth, I'm very happy to share my pattern for making a felt Millennium Falcon.

I love, love, love making Star Wars projects, and usually they start as gifts for my brother. In the past, I've designed a Wompa, a Storm Trooper, Maz Kanata, C-3PO, and more. This particular plush is a little different from the others, in that it's a ship and not a character. But I think Star Wars fans would agree that the Millennium Falcon sort of is a character, right?

So here's the story on this. It's been a while since I shared a Star Wars Day pattern and that's because I started this two years ago. At least, I think that's when I started it. It's been so long that I couldn't actually find the step-by-step photos I took. Yikes!

Since I can't show you all the steps for this, I almost decided to let it be only a one-of-a-kind felt ship. But maaaaayybe you're up for trying this with a few simple instructions? I'll warn you that at times it was a little fiddly. But worth it, I think! Be sure to look at the photos as a guide for placement on the pieces.

Millennium Falcon Felt Plush

Here's what you need:

Grayish-tan felt in two shades (though you could use just one)
Charcoal gray felt
Aqua blue felt
Dark gray-tan embroidery floss
Needle
Pins and/or Wonder Clips
Stuffing

Millennium Falcon Plush Pattern PDF

1. Embroider the lines from the main ship piece in light gray-tan felt. Embroider the lines from the smaller pieces on dark gray-tan felt.

I did this before cutting out the shape because I used Sulky Sticky Fabri-Solvy, so I didn't want to risk it shrinking when soaking off the stabilizer.

I used three strands and back stitch for almost everything except the thick lines on the pattern. For those I did bullion knots. And for the dots on the small front piece I used french knots.

2. Cut out the embroidered Millennium Falcon shape (plus an extra one that's not embroidered) and the small embroidered pieces. Stitch the small pieces onto the main piece with whip stitch and three strands of embroidery floss. They should fit in the non-embroidered areas.

Millennium Falcon Felt Plush
Millennium Falcon Felt Plush

3. Cut a strip of aqua blue felt with the long rectangle template. Cut a long strip of light gray tan felt that's the same height as the blue strip (1-1/4" tall). I think mine was 24 inches? You can piece this together if you need to. Basically it will need to wrap around the sides of the Falcon.

I added a face to the blue piece because it's kinda my thing. You can do that too if you want, and now's the time! But it's more traditional without the face.

4. Join the end of the blue strip to the end of the tan strip. The blue will be the back of the ship when it goes into lightspeed. Start sewing the blue strip in place along the back where the two indents are, attaching it to the embroidered top. Use three strands of embroidery floss and whip stitch.

Continue sewing around the entire shape, fitting the tan felt into all the lines of the ship. You should end up with a little extra tan felt, which you can trim off. If you came up short, add another strip to finish it off.

5. Next, sew around the bottom in the same way. You should end up with an opening where the blue and tan meet.

6. Fill the Millennium Falcon with stuffing. When it puffs up a little, it's super cute! But don't overstuff it. Stitch the opening closed.

Millennium Falcon Felt Plush

7. For the escape pods and cockpit, using the templates, cut a curved piece of dark gray-tan felt and cut it in half. Cut one half-curved piece (the same size as the ones you just cut) from charcoal gray felt. Cut three charcoal gray circles and one dark gray-tan rectangle.

8. Stitch the curved pieces onto the circles and then stitch the end down where it overlaps. You should have pieces that flare out a little at the bottom.

9. For the gray-tan side escape pods, put a tiny bit of stuffing in each one and then stitch them down to the sides of the ship in the large indented areas.

10. For the cockpit, stitch the rectangle to the end of the charcoal gray piece and stitch it into a cylinder.

Now, this next part is the hardest to explain, because I kid you not, I just cut the thing. If it doesn't go well the first time, thankfully, felt isn't very expensive.

11. Flatten the cylinder on the cockpit piece and cut it off at about a 45-degree angle. Add some stuffing and stitch it onto the side of the ship as shown in the photos.

Millennium Falcon Felt Plush

All that's left to do is send your Millennium Falcon to infinity and beyond! Wait...that's the wrong movie.

Anyway, I hope you enjoy this VERY paired down tutorial. I'll do my best to answer any questions, but a lot of this I just figured out as I went. As I said, this was made as a gift, but over a long period of time and without taking notes. Oops!

Also, my version of the Falcon is nowhere near as detailed as the real deal, even with all that stitching on top. This is more like an impression of the Millennium Falcon, and I kind of love that.

May the Fourth be with you!

NOTE: The Millennium Falcon is copyright Disney/LucasArts, and I'm only sharing this pattern as fan art. Please do not sell items made with this pattern.

4 comments:

  1. this is awesome! You have the best felt projects, and of course the addition of that smile! I enjoyed doing the Christmas ornaments, and will be making this one too! May the 4th be with you, always!

    ReplyDelete
  2. OMG so cute!!!!! I will have to make one of these for sure :)

    ReplyDelete
  3. I shared this for May the Fourth on facebook. My daughter who embroiders loves it!

    ReplyDelete
  4. wow idea creative for me
    thankyou

    ReplyDelete

I often reply to comments in the comments...check back if you have a question!